Masterpav Deco Cut TDS

PRODUCT DESCRIPTION

Masterpav Deco Cut is the act of remodeling existing and new concrete by cutting patterns and texture into the surface. Cut designs and patterns simulate buildings materials such as tile, stone, pavers or a ranging variety of graphic elements. Geometric patterns with straight, circular and custom designs are cut directly into the surface on the concrete.

AREA TO USE

Ideal for exterior and interior use such as shopping complex, office floors, showroom, courtyards, car parks, driveways, patios and etc. Application on existing concrete to create a mottled finish or application on new smooth trowel concrete works- color hardeners & Polymer Modified Cementitous Compounds.

COLOR

On mottled finish use DF400 Concrete Stain selection chart and for smooth trowel use Color Hardener Color Selection Chart.

APPLICATION INSTRUCTION

Application on existing concrete to create a mottled finish.

1. For plain concrete, remove all contaminants such as oil, grease, etc by scrubbing with a general floor purpose cleaner and follow by a light acid wash or sand blast if required

2. Upon completion, apply Masterpav DF400 Concrete Stain, a specially formulated non-reactive semi transparent stains that will penetrate and color most porous surfaces

3. The coverage rate is around 40sqmeter for 2 bottle concentrate when added to the carrying agent. Applications techniques & coverage varies from design and concept

4. Upon completion, mark out the floor design like tile design, perfect circles, straight lines and others available templates. Using a precision full line of decorative concrete cutting machines to cut width of 0.09″, 0.125″, 0.250″ and 0.375″ width & with a depth maximum 8-10mm.

5. Upon completion, apply 2 coats of Masterpav Endurable Sealer @ 1:2:6 ratio (Comp 1: Comp 2: Water)

 

Application on new smooth trowel concrete work- color hardeners

1. The new concrete is finish with Masterpav Color Hardener and trowel to finish.

2. After 14 days or longer apply a thin coat of color polymer modified cementitious compound (color same as the Masterpav Color Hardener) with a squeegee trowel to finish. Allow the surface to dry completely

3. Upon completion, mark out the floor design like tile design, perfect circles, straight lines and others available templates. Using a precision full line of decorative concrete cutting machines to cut width of 0.09″, 0.125″, 0.250″ and 0.375″ width & with a depth maximum 8-10mm.

4. Upon completion, apply 2 coats of sealer, the primer coat and the top coats (SG Sealer)

Protection

The finish floor shall be protected as heavy traffic shall be avoided for 28 days. The contractor/ or principal shall take necessary steps to protect the finished floor from damage by other trades

PACKAGING

Mottled Finish

Masterpav DF400 Concrete Stain = 90-125ml/bottle
Masterpav Endurable Sealer  = 3Kg/Set

Smooth Trowel Finish

Masterpav Color Hardener = 25Kg/Bag
Polymer Cementitious Compound PCC- Color = 25Kg/Bag
Masterpav SG Sealer (SG12, SG56, Fl & SG50) = 20Lit/Pail

All statements and recommendations are based on experience we believe to be reliable. The use or application of these products being beyond the control of the seller or manufacturer, neither the seller nor the manufacturer make any warranty expressed or implied, as to results or hazard from its use. The suitability, risk and liability whatsoever of a product for any intended use shall be solely up to the user.